Airtel Broadband

Configuring Beetel 220BXI ADSL2+ MODEM

with a Linux box

Configure the modem in pppoe mode

• Type 192.168.1.1(this is gateway i.e. modem) in the bowser's URL
  

• enter the username and password

Username : admin
Password : password


now the beetel page will open up

• Click the WAN link given on the left side of the page

Configuration table comes up

• Click the edit button
  

• Enter the vpi and vci values
  

VPI : 1
VCI : 32

• Click on next button

Select Connection type :

PPP over ethernet (PPPoE)

at the bottom on this page there is a drop down menu to select

ENCAPSULATION MODE

• select LLC/SNAP-BRIDGING


• cilck next button
  

Enter PPP Username and Password

PPP Username: (***********_dsl@airtelbroadband.in)
PPP password : **********
PPPoE Service Name : airtel
Authentication mode : AUTO

• Click next button

Enable IGMP Multicast, and WAN Service
Enable IGMP Multicast (do not select this)
Enable WAN Service (select this)
Service Name pppoe_1_32_1

• Click next button

WAN Setup - Summary

• Click on SAVE

Wide Area Network (WAN) Setup

• Click SAVE/REBOOT

Modem will reboot and your modem is configured.


NETWORK CONFIGURATION on the system

static ip: 192.168.1.2 -192.168.1.254 (ip range, enter any one)
subnet mask : 255.255.255.0
gateway ; 192.168.1.1

Add any one DNS

202.56.215.54, 202.56.215.55, 202.56.215.6, 202.56.230.6